Ezcap Software Update
Windows 7, drivers load but i get an error message for the usb emp audio device driver, this device cannot start (code 10). The drivers working show windows 32 bits this computer is running windows 64 bits. I just plug usb in and this automatically loads drivers. I have installed it on a vista computer and it worked fairly well still learning about the ezcap video to dvd options.
Ezcap Software Update
I have tried to instal the drivers from ezcap website but what ever i do it says i have the most up to date drivers. Thanks for any help.
Hi Jack, You may try the following steps and check. Step 1: Uninstall all the USB entries from Device Manager a. Click on Start and type devmgmt.msc, and then click Ok.
Expand Universal Serial Bus controllers. Note: You might have to scroll down the list to find this item. Right-click the first USB controller under Universal Serial Bus controllers, and then click Uninstall to remove it. Repeat the above step for each USB controller that is listed under Universal Serial Bus controllers. Restart the computer. After the computer starts, Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled. Check the USB device to see whether it is working or not.
Step 2: You can also update the chipset driver to the latest by visiting the computer manufacturer’s website. You may also refer to the following article and check. For whatever it's worth to anyone. On an XP Platform am having the same problem using ArcSoft Showbiz DVD 2 with a Tevion High Speed DVD Maker USB attachment with SVHS and Composite Video Input and Left/Right RCA Phono Jack audio inputs. This all worked fine a couple weeks ago, and now can't get the audio to work. Tried everything I can think of, hesitant to go to unknown sites and potentially download something that could come with things I don't want. Contact ARCSOFT, plan is within the next few days ArcSoft to remote connect to my XP platform and see if they can resolve.
HOWEVER, in the meantime. Have a reasonable workaround; which is to use a standard 1/8' plug and connect either from my camcorder output, or earphone output, to my microphone input on my PC. Then select using Microphone from the standard audio interface/driver. However, couple points: 1.
Make Sure Mic Boost is OFF in the sounds control panel, otherwise the audio is awful. If using earplug as source on the camcorder, test adjusting the output video with various levels so your camcorder is set at an optimal audio volume for the earplug. You may also want to experiment with Microphone Volume settings.
But be sure to evaluate based on the actual video recording, and NOT what you are hearing in 'Monitor' condition as you are recording. For whatever it's worth to anyone. On an XP Platform am having the same problem using ArcSoft Showbiz DVD 2 with a Tevion High Speed DVD Maker USB attachment with SVHS and Composite Video Input and Left/Right RCA Phono Jack audio inputs. This all worked fine a couple weeks ago, and now can't get the audio to work. Tried everything I can think of, hesitant to go to unknown sites and potentially download something that could come with things I don't want. Contact ARCSOFT, plan is within the next few days ArcSoft to remote connect to my XP platform and see if they can resolve.
HOWEVER, in the meantime. Have a reasonable workaround; which is to use a standard 1/8' plug and connect either from my camcorder output, or earphone output, to my microphone input on my PC. Then select using Microphone from the standard audio interface/driver.
However, couple points: 1. Make Sure Mic Boost is OFF in the sounds control panel, otherwise the audio is awful.
If using earplug as source on the camcorder, test adjusting the output video with various levels so your camcorder is set at an optimal audio volume for the earplug. You may also want to experiment with Microphone Volume settings. But be sure to evaluate based on the actual video recording, and NOT what you are hearing in 'Monitor' condition as you are recording. Hi - I gave up with this software - I never did get the thing to work, but with other software I found that automatic updates my pc would stop the software from working, so I simply did a system restore back to a date before the item stopped working and lo and behold it worked, but of course if your pc is set to automatic updates each time the pc updates itself with new sound drivers or whatever a system restore is going to be needed to put the pc back to when the correct dowmloads allowed the software to work properly. I hope this helps. ps in reply to my post of Feb 16 2012 above I did indeed buy what I described with that version title from a seller ebay - I was conned probably and I never did get the thing to work, but it had a nice box.
NEW Red Box Edition. New box and new drivers. If it's not red, it's not ours. Now with full Skype, MSN, Yahoo, etc support. Stream live with whatever you plug in to your EzCAP. If you want to transfer your treasured videos from vhs to dvd, record what's on the tv or capture your Xbox 360 or Playstation3 live in PAL 60 colour, this is the product for you. Sadly there are lots of fakes now made in China.
To combat this, the manufacturer has had to change their trading name from Easycap to the trademarked name ezcap and radically redesigned their product. If you are offered an Easycap product, it is a fake. You get what you pay for.
Ezcap116 DC60+ (Supersedes Easycap DC60+) Supports Windows XP/Vista/7/8 + MAC. Full retail, boxed, 12 month warranty. Latest model. (Supersedes ezcap DC60+) with full version video editing software ArcSoft ShowBiz 3.5. Supports all formats: record in DVD, VCD, SVCD; Share finished projects on DVD, tape, the Web, and mobile devices.
Watch video source in full screen in preview/capture mode. Upload captured video directly to YouTube at the press of a button. (including HD). Powerful video conversion: Easily convert your movies to play on most portable devices like iPhone, iPod, Apple TV, PSP, PS3, Xbox360; and mobile phones. Enables you to take still pictures by pressing the button on the device.
Capture Xbox 360/PS3 in colour. Ever wondered how gamers can capture their games and upload them to YouTube? Now you know. Capture High-quality video with audio direct by USB 2.0 interface without sound card.
Catpure video source VHS, V8, Hi8 etc. Video recorder, camcorder, DVD player or Satellite TV receiver, laptop/PC. Capture and edit analogue video sources to MPEG 2 format on your hard disk. Support Brightness, Contrast, Hue, and Saturation control. Supports all formats: record in DVD, VCD, SVCD; Share finished projects on DVD, tape, the Web, and mobile devices.
Support Brightness, Contrast, Hue, and Saturation control. Supports high quality video resolution: NTSC: 720 x 480 @ 30fps; PAL: 720 x 576 @ 25fps. Real time MPEG 1 or MPEG 2 format. Supports NTSC, PAL Video format. Video input: One RCA composite, One S-Video.
Audio input: Stereo audio (RCA). Includes professional video editing software ArcSoft ShowBiz 3.5. It provides great editing functions for you. With it, you can make your family album and your own movies at ease. Plug and Play.
N o need for an external power source. Just plug into your USB port and that's it. Easy to use. Dimension: (L)73 x (W)24 x (H)21mm. Supports Windows XP/Vista/7/8/10 32 & 64 bit.
MAC OS X 10.5.8 or later System Requirements: P4 1.7GHz CPU or above 256MB RAM VGA card with 32MB memory One available USB 2.0 port 1 GB+ hard drive space for video capture and editing Compatible Windows-sound card Microsoft windows XP/Vista or Windows 7/8/10 Package Contents: ezcap116 USB 2.0 video grabber with audio Quick Installlation Guide Software CD (Includes drivers, ArcSoft Showbiz 3.5 software and user manual).